Vestil Edge-O-Dock leveler permanently attaches to the face of the dock. It is recommended that docks be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping is twenty-nine (29) inches (29-13/16" with 30,000 lb. capacity), with a (36-5/8") inch long ramping length available for minor grade. A steel dock edge or approach ramp is required for proper installation.
♦  Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling it down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.
♦   Manual Hydraulic Hand Pump system lifts the leveler and extends the lip. The operator actuates the lowering valve allowing the deck to descend and rest upon the trailer. The unit has a hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line, and oil. The truck must pull out for the leveler to return to the stored position.
♦   Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises, and the lip will extend—115V, 1-phase power standard. The unit has a motor, pump, control box, cylinder, lines, and oil. The truck must pull out for the leveler to return to the stored position.