WireCrafters Wire Tenant Lockers offer a secure and efficient solution for organizing residents' belongings in common storage areas in multi-family buildings. The durable welded mesh construction provides both strength and security while offering installers the flexibility to customize layouts and professionally finished storage spaces. These lockers help eliminate clutter and maximize the efficient use of available space.
Additionally, most condominium buildings can recover the installation costs in less than 12 months by renting the lockers to tenants at standard rates, making them a practical and cost-effective investment.
Storage Lockers Made Simple & Secure
WireCrafters tenant storage lockers are made of 10 gauge wire in a 2″ x 2″ square welded wire mesh. This mesh is welded into a 1 1/4″ x 1 1/4″ x 13 gauge rolled formed angle. The storage locker’s open but secure design allows existing lighting, ventilation, and fire suppression systems to function effectively throughout the secured storage areas.
All Steel Welded Wire Tenant Storage Lockers
WireCrafters tenant storage lockers are available in two basic styles: single-tier walk-in and double-tier. The most common configuration is the single-tier walk-in type with a 3′-0″ or 4′-0″ wide door and a depth of 3′-0″, 4′-0″, or 5′-0″. The standard height is 7′-6″ high. The single-tier storage locker gives the tenant plenty of storage space for their out-of-season belongings.
Double-tier lockers are typically used when the building has limited space but a large number of tenants who require additional storage. The width and depth of the double-tier storage lockers are the same as those of a single-tier building, but the height of each individual locker is 3′-9″, for a combined total height of 7′-6″.
RapidWire tenant storage lockers come standard with a simple padlock lug, and the tenant provides their own padlock. A three-point lock with a built-in keyed cylinder is also available.
Designed for On-Site Flexibility
RapidWire tenant storage lockers' modular design makes laying out and installing your storage locker project easy. Doors are pre-hung, hinges are welded, and it takes four bolts to connect a wall panel to a door panel. This ensures easy installation and provides the lowest total cost of ownership. The welded wire may be modified in the field, making installations around obstructions like electrical conduits, heating ducts, and water pipes easy. Because the wire is welded at every intersection, field modification does not affect the structural integrity of the storage locker panels.
Additional Options Available for Storage Lockers.
The standard storage locker consists of the front door panel and side walls. Other components may be required.
♦ CEILING PANELS are available if the locker is more than 6″ away from the existing ceiling. These welded wire ceiling panels allow light and ventilation to come through while providing additional security for the lockers.
♦ BACK PANELS made of solid 16 gauge sheet metal or welded wire are also available for lockers that are back to back in the middle of a room or away from a wall. You may also require a back panel when your existing wall is not level or has obstructions.
♦ SHELVES Full and half shelves made of 16 gauge solid sheet metal can be added to lockers to keep smaller items off the floor.
♦ BOTTOM OR FLOOR PANELS can also be added to the lockers. A solid 16 gauge sheet metal bottom panel can keep items 3″ above the floor for those areas where water could be a problem.
Key Storage Locker Features
♦ Welded mesh allows field modifications for unforeseen obstructions.
♦ Two basic styles, single or double tier.
♦ Pad lock lugs, with door strikes standard.
♦ Three-point lock.
♦ Constructed of industrial grade materials.
♦ May be used individually or in a group.
♦ Styles may be mixed within a group.
♦ Easy installation.
♦ Approval and Erection drawings supplied with your order.
MORE INFORMATION
