Eagle Stainless Single Gowning Rack, Non-Removable Hangers with dissipative nylon feet standard. Hanger slots are classic on 3" centers. 75" in height.   Features: 1-1⁄2˝ welded tube frame is shipped knocked down and bolted together with cross members. Electropolished or brushed 300 series stainless steel. Nylon dissipative feet standard. Hanger slots are classic on 3˝ centers, with other spacing available. Fourteen gauge hanger rails with hanger slots spaced on traditional 3˝ centers. Slots are designed to retain gowns in a fixed position by allowing the hangers (not included) to swing front-to-back but not left-to-right, while the shape facilitates a smoother laminar flow than many square hanger rails. Vertical supports are constructed of heavy gauge type 304 stainless steel 1-1⁄2˝ square tubing, fully welded, ground, and polished to its original finish. Each unit is supplied with four adjustable feet that are constructed to dissipate a static charge. Horizontal supports are bolted to vertical uprights using stainless steel bolts and constructed of 1˝ O.D. type 304 stainless steel tubing with heavy gauge stainless steel backing plate. The bolts are covered with a stainless steel cap to eliminate any crevasses in which dust might settle. The Hanger rail is constructed of heavy gauge type 304 stainless steel with hanger slots located every 3˝ along the length of the rail.