Illinois Engineered Heavy Duty Single Folding Gate - SSG1170

  • Illinois Engineered Heavy Duty Single Folding Gate - SSG1170
  • List Price: $737.00

    Our Price: $541.21

  • Availability: Usually, it ships in 2-3 days.

Illinois Engineered Heavy Duty Single Folding Gate - SSG1170 designed to secure dock, receiving, garage, and service doorways, hallways, and entrance ways up to 12 feet wide without sacrificing visibility or air circulation.  Galvanized Steel Folding Gates pivot 180 Degrees on their mountings, moving entirely out of the opening and leaving it completely clear of obstructions. Illinois Engineered Products Folding Gates can be installed virtually anywhere and any way you need them, including but not limited to inside door jambs, outside door jambs, between posts or bollards, attached to pallet racks, between walls, and even on windows! Installs in less than 30 minutes!

♦  Width:  10' to 11' wide 

♦  Collapsed Height:  7'-0" high  

♦  In Use Height:  6'-6" high  
♦  Stacked Width:  15" 

♦  Weight:  100 pounds 

♦  Has center drop a pin  
♦  Heavy-duty 14-gauge steel u-channel webbing, riveted back-to-back with zinc-plated rivets  
♦  Heavy-duty 12-gauge steel 1-1/2”x1-1/2” vertical angle frame  
♦  Galvanized Finish  
♦  Solid Steel Casters  
♦  Locking Bar  
♦  Standard: Locks on right; Optional: Lock on Left  
♦  Install in Door Jamb or Face-mount
sliding gate

 

Options:  
♦ Cylinder Key Lock:  Built-in locking mechanism defeats any forced entry attempts to pry the gate in any direction.  Pre-installed at the factory.
Padlock:  2” hardened steel with plated shackle.
School Strap:  Allows gates to be locked in the retracted position.
Gate Handle:  For more effortless opening and closing.
Free Standing Post:  2" x 2" x 8' tall post with 6" base plate allows mounting without attaching to the building.
Extender Bracket:  Extends gate 6” from wall or casing for clearing overhead door tracks and bollards.
H Bracket:  Mounts overhead in the center of the gate to provide additional security and rigidity.

Illinois Engineered Heavy Duty Folding Gates are specialized security gates often used for commercial, industrial, and even residential settings. These gates are designed to provide secure access control and are known for their durability and sturdiness. Below are some of the uses and benefits of using these folding gates:

Uses:
♦  Retail Stores and Malls: Protect storefronts during non-business hours or section-off areas for maintenance or repair.

♦  Industrial Units and Warehouses: Provide a barrier at loading docks or sections off restricted areas.
♦  Residential Buildings: Used in condominiums, apartments, or homes where additional security is desired, especially at entry points.
♦  Schools and Institutions: Secure corridors, hallways, or specific rooms during non-operational hours.
♦  Parking Garages: Control vehicular access or designate specific areas.
♦  Temporary or Seasonal Use: Secure areas during specific events or times.

Benefits:
♦  Security: The primary benefit is added security. The gates act as deterrents against unauthorized entry, break-ins, and theft.

♦  Durability: Designed for heavy-duty use, these gates are built to last, resisting wear and tear even with frequent use.
♦  Visibility: Unlike solid barriers, the open design allows for visibility. This means businesses can display products even when closed, and security personnel can monitor areas without obstructions.
♦  Ventilation: The open grill design ensures that airflow is not restricted, which can be especially important in indoor settings or parking garages.
♦  Ease of Use: These gates can be easily folded and unfolded as needed, providing flexibility in access control. They typically come with smooth gliding wheels, making them easy to move and position.
♦  Versatility: They can fit various opening sizes and be used indoors and outdoors.
♦  Cost-effective: Compared to other security solutions like electronic barriers or manned security posts, these gates can be more cost-effective in the long run, especially considering their durability.
♦  Low Maintenance: Being engineered for heavy-duty use and with fewer mechanical parts than electronic alternatives, these gates typically require less frequent maintenance. 

Note: Always follow the manufacturer's instructions and safety guidelines when using this product.

Watch Product Video

Width: 10' to 11' wide 
♦ Collapsed Height: 7'-0" high 
 ♦ In Use Height: 6'-6" high ♦ Stacked Width: 15" 
♦ Weight: 100 pounds 
♦ Has center drop pin ♦ Heavy-duty 14-gauge steel u-channel webbing, riveted back-to-back with zinc plated rivets ♦ Heavy-duty 12-gauge steel 1-1/2”x1-1/2” vertical angle frame ♦ Galvanized Finish ♦ Solid Steel Casters ♦ Locking Bar ♦ Standard: Locks on right; Optional: Lock on Left ♦ Install in Door Jamb or Face-mount

There are no related accessories for this product.

Product Information
FAQ's
Installation
Want to be sure you’re paying the lowest price?
We guarantee it.

We are making everything possible to provide you the best products on the lowest prices possible. Due to the higher number of products in our store we think that is possible some of the prices on our products to not be accurate.


If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!


Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields
* Your Name:
* Your Email:
* Price in other store:
Our price: $541.21
* Link to the product:
Comments (optional):
 

Tags: Illinois Engineered Heavy Duty Single Folding Gate - SSG1170, heavy duty folding security gates, single accordion dock gate, industrial folding gate