Hallowell CTL39230-5A-PL Cell Phone Locker

Manufacturer: Hallowell-List Products - Authorized Dealer
MFG's Part Number: UCTL39230-5A-PL

List Price: ~~$1,392.28~~

Our Price: $594.10

Larger Quantities: Use Quote Form
Availability: Usually, it ships in 2-3 weeks.

Quantity

Assembly Options

Lock Options

Hallowell CTL39230-5A-PL Cell Phone Locker is ideal for use in government buildings, schools, health clubs or any location where personal items, cell phones and tablets need to be securely stored.

♦   Size: 27" wide x 30-1/2" tall x 12" deep.
♦   Weight: 82 pounds
♦   Locker Type: 3 wide x 5 openings high
♦   Lock Type: Padlock (by others)
♦   Doors: Door to be fabricated from single sheet prime 20 gauge with single bends at top, bottom and double bends at the sides. Doors shall be non‐ventilated (solid). Door Hinges: Shall be a continuous piano hinge securely welded to the door and riveted to the frame.
♦   Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from 20 gauge sheet steel. The one‐piece side/frame shall be formed to provide a continuous door strike on the latch side.
♦   Body: Fabricate top, bottom, back and tier dividers of 20 gauge (minimum) sheet steel. Shelves to have single flange on three sides with double flange at front serving as cross frame between tiers. Tops and bottoms to be single flanged at back and double flanged at front spanning the full width of the locker unit.  Lockers are wall mountable.


PADLOCK: hasp cam lock for padlocks

Order 3-wide units for best value. Order 1-wide units to complete quantity needed for each continuous row.

Size: 27" wide x 30-1/2" tall x 12" deep. ♦ Weight: 82 pounds ♦ Locker Type: 3 wide x 5 openings high ♦ Lock Type: Padlock (by others) ♦ Doors: Door to be fabricated from single sheet prime 20 gauge with single bends at top, bottom and double bends at the sides. Doors shall be non‐ventilated (solid). Door Hinges: Shall be a continuous piano hinge securely welded to the door and riveted to the frame. ♦ Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from 20 gauge sheet steel. The one‐piece side/frame shall be formed to provide a continuous door strike on the latch side. ♦ Body: Fabricate top, bottom, back and tier dividers of 20 gauge (minimum) sheet steel. Shelves to have single flange on three sides with double flange at front serving as cross frame between tiers. Tops and bottoms to be single flanged at back and double flanged at front spanning the full width of the locker unit. Lockers are wall mountable. ♦ Locking/Latching: Locks serve as door handle/pull. Choose from one of three options: Padlock: Padlock hasp cam lock for padlocks by others. Key Lock: Cylinder cam locks control keyed to one system DigiTech™ Lock: Code access electronic lock in temporary‐use mode that can be programmed for permanent use. ♦ Finish: 711 Platinum (light gray) powder coat finish

There are no related accessories for this product.

Product Information

There is no related video for this product.

Want to be sure you’re paying the lowest price?
We guarantee it.

We are making everything possible to provide you the best products on the lowest prices possible. Due to the higher number of products in our store we think that is possible some of the prices on our products to not be accurate.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields