WireCrafters has supplied TA-50 Military Gear Lockers and other types of Storage Lockers for the demanding requirements of the military and other government agencies.  Officers prefer WireCrafters Lockers because of their modern look, innovative design, heavy duty materials, and quality construction. These lockers are built to last. Quick to install; rock solid once in place; there is no better choice than WireCrafters Military Storage Lockers.
TA-50 Military Storage Lockers
Officers prefer WireCrafters TA-50 Military Storage Lockers because of their modern look, innovative design, heavy duty materials, and quality construction. Quick to install and rock solid once in place, WireCrafters has supplied TA-50 Military Storage Lockers and other types of storage solutions for the demanding requirements of the military and other government agencies for years. Our storage lockers are built to last.
TA-50 Features & Components
TA-50 Military Storage Lockers can be customized and configured with different options and accessories within the lockers. Typically, these storage lockers come equipped with a double hinged door on the front of the locker featuring a three point lock which will accept a user-supplied padlock. The three point lock is very secure; a rod is engaged at both the top and bottom of the storage locker and a heavy steel padlock lug is positioned in the center of the door. Inside the storage locker, there are three coat hooks as well as a single clothing rod, perfect for hanging gear and other apparel. Also, there is a 16 gauge solid steel shelf mounted above the hooks and rod for storing gear and other items.
TA-50 Gear Locker Specifications
The TA-50 Storage Locker's standard size is 24" deep x 42" wide x 78" high, but custom sizes are also available. The wire mesh on the front and sides of the locker is 1-1/2" square 10 gauge welded wire or 1-1/2" 13 gauge flattened expanded metal. Other meshes or expanded metals are available.  Formed 16 gauge sheet metal with 1-1/4" flanges are formed and welded to make up the top panel of the locker. The same 16 gauge sheet is formed to make the interior shelf, which is then securely welded into place. The bottom panel of the storage locker is a heavier 14 gauge steel, 4" high, and is also welded into place. The back panel of the locker is made of 20 gauge sheet metal. The locker's coat rod is 3/4" schedule 40 pipe welded to 1/8" x 1-1/4" mounting brackets. Three coat hooks are mounted to the interior back panel of the locker.
Custom TA-50 Storage Lockers
Depending on the gear to be stored, different options and configurations are available to customize the storage locker to fit your requirements. We can also provide secure hatches within the locker to store valuable gear or personal items. Openings can be made for helmets and scuba gear, or we can add additional shelves for foot gear or other apparel.
Lockers can be shipped fully assembled for quick installation, or knocked down for on-site assembly. If assembled on site, you may choose to use common wall and ceiling panels to lower the overall cost of your storage locker project.

WireCrafters TA-50 Military Storage Lockers

WireCrafters Military Lockers Features:
Choose from Welded Wire, Woven Wire, Expanded Metal or Sheet Metal.
Choose from tubular or angle structural frame.
Full line of Sliding and Hinged doors available.
Sliding doors have patented tamper resistant latch mechanism.
Pad lock lug standard, key locks available.
Assembly hardware (where required) is inaccessible from the exterior.
Standard 3/8" mounting hardware is the heaviest in the industry.
Heavy duty options available.
Coat and duffle bag hang bars.
Fixed and folding shelves available.
Helmet and equipment inspection hatches.
Shipped set-up or knocked down.

TA 50 Gear Locker Specifications
Furnish all welded TA50 Gear Lockers as manufactured by WireCrafters LLC.,
Size and quantity shall be as specified on the drawings.
Standard Size: 24" deep x 42" wide x 78" high, custom sizes available.
Mesh: 1-1/2" square 10ga. (.135 thick) welded wire standard, other meshes including 1-1/2" 13 gauge expanded metal are also available.
Sides: 1-1/4" x 1-1/4" x 1/8" angle and channel with 1-1/2" square mesh securely welded to frame.
Door(s): 1-1/4" x 1-1/4" x 1/8" angle with 1-1/2" square mesh securely welded to frame. Doors have full length angle strike, three point cane bolt lock on double door units with chrome plated padlock able handle.
Top: Formed 16 gauge sheets with 1-1/4" flanges and formed integral door stop. Top welded to locker frame.
Shelf: Formed 16 gauge sheets with one piece coat rod bolted to underside of shelf. Shelf is securely welded in place.
Bottom: Formed 14 gauge sheet, 4" high, securely welded in place.
Back: 20 gauge sheet metal securely welded to locker frame.
Coat Rod: 3/4" schedule 40 pipe welded to 1/8" x 1-1/4" mounting brackets. Finish is hot dip galvanized.
Coat Hooks: Three per unit standard, mounted on back wall under shelf.
Hardware: All interconnecting and assembly hardware is supplied.
Finish: All non-plated parts shall receive one prime coat of gray acrylic enamel electro-statically applied. Product is finished for interior applications. Materials are subject to nicks and scrapes while in transit. Touch up paint provided. Optional powder coat finish available
Note: Lockers are all welded construction and are shipped fully assembled, floor mount brackets supplied upon request. Ready to assemble version also available.
Custom Sizes Available.