WireCrafters 4-Walls Welded Wire Security Cage Model RW14884H is lighter weight with larger mesh openings than woven wire.  Unlike chain link fence or other alternatives, wire partitions are fully framed welded wire panels that bolt together section by section. Most maintenance departments can install this modular partitioning product without the use of special tools or equipment; allowing for an easy installation of tool cribs and security cages.  Using our wire partition panels, you may construct tool crib walls and ceilings from the same modular sized panels. The partition panels may be stacked to your desired tool crib wall height, and the panels easily bolt to posts using standard hand tools. A full line of hinged, double hinged, and sliding doors are available for tool cribs, and the open but secure design allows free circulation of light, HVAC, and fire suppression systems throughout the secured area

♦  Size:  14'-8" wide (door side) x 8'-4"deep x 8'-5-1/4" High (4-Walls)
♦  Door: 3' or 4' wide hinged (swing) door with cylinder key lock. Includes three 4” x 4” 10-gauge tight pin hinges, key lock, door posts, and all hardware. Universal constructed to work on the left or right hand side, and to swing inside or outside of the partition.

Style 840    Wire: 10 gauge, 2" x 2" welded wire pattern. Frame:  1-1/4" x 1-1/4" x 1/8” Angle

♦  All panels and post are tagged with numbers for easy assembly.
♦  Footplates: 2" wide x 7" long extend outside the post by 2½” per post position depending on footplate orientation. If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.  Please contact us.
♦  Enclosures are secure as hardware is inaccessible from the outside of the wire cage.
♦  3/8" assembly hardware is used and is the heaviest in the industry.  All necessary erection hardware is included (including concrete floor anchors).
♦  Standard Color:  Gray

After you place an order within 24 hours, we will send you a freight quote for your approval.  
You can also ship it using your freight carrier, just include the trucking company and your account number.  Add this information in the freight section during checkout.

(SF-1) Key Lock - Standard Partition Lock Front with (SB-1) Recessed Thumb Turn Knob - Standard Knob Back

(SF-1) Key Lock - Standard Partition Lock Front with (SB-3) Doorknob - Typical size doorknob for easy exit.

(SF-1) Key Lock - Standard Partition Lock Front with (SB-4) Lever Handle - Alternative to standard doorknob. Meets ADA requirements.

Coded Card Reader
Activates electric strike or magnetic lock upon insertion of coded card. Ten cards supplied. Requires keypad controller for card activation.  Optional Electric Strike for hinged door or Mag Lock for a sliding door is required with card reader.

Ten-Digit Keypad
Operates electric strike or magnetic lock upon entry of four-digit pass code. Programmable up to 64 different codes. Numeric keypads available on hinged and sliding doors.  Optional Electric Strike for hinged door or Mag Lock for a sliding door is required with card reader.

Adams Rite eForce Keyless Entry
Ten-digit keypad with lever handle entry. Option for push paddle and push bar exit on hinge doors and thumb turn lever on slide door. Supports up to 150 individual users with different codes. Available on both hinged and sliding doors.

Five-Button Coded Access Lock
Code or keyed entry. Match with push paddle or thumb turn knob inside. Available on hinged doors only.

Electric Strike
Allows hinged doors to open when activated by electrical locking device provided by WireCrafters or others. Available on Hinge Doors Only.

Hinged Door Closer
Commercial grade hydraulic door closer causes door to close and latch upon release.

Push Bar (Optional)
Push bar runs the full width of a hinged door that allows personnel a quick exit from the secured area.

Don’t see what you are looking for?
Quote includes freight and all erection hardware 

Watch Product Video